The power and energy meters allow the detection of high power and energy for single-phase loads up to 24 kW with exceptional accuracy. If limit values are exceeded, a digital output can be set. An external circuit may react to dangerous situations and deactivate the respective peripherals. The recording of the power is recorded via the front-mounted laboratory sockets of the digital multimeter.
Special emphasis was placed on the graphic display of measured values. The power meter provides a graphical representation of the current and stored measured values using X-Y diagrams, ensuring fast and reliable detection for each measurement.
Display
Simultaneous display of U and I
Active power
- 24 kW to + 24 kW at 750 V AC
- 7.5 kW to + 7.5 kW at 230 V AC, (short 9.2 kW)
Accuracy: ± 0.2% +10 dgt
Active energy
- 24 kWh to + 24 kWh at 750 V AC
- 7.5 kWh to + 7.5 kWh at 230 V AC, (short 9.2 kWh)
Accuracy: ± 0.2% +10 dgt
Apparent power
0 to 24 kVA at 750 V AC
- 7.5 kVA to + 7.5 kVA at 230 V AC, (short 9.2 kVA)
Accuracy: ± 0.4% +10 dgt
Apparent energy
0 to 24 kVAh at 750 V AC
0 to 7.5 kVAh at 230 kV AC, (short 9.2 kVAh)
Accuracy: ± 0.4% +10 dgt
Reactive power
- 24 kvar to + 24 kvar at 750 V AC
- 7,5 kvar to + 7,5 kvar at 230 V AC, (short 9,2 kvar)
Accuracy: ± 0.2% +10 dgt
Reactive energy
- 24 kvarh to + 24 kvarh at 750 V AC
- 7,5 kvarh to + 7,5 kvarh at 230 V AC, (short 9,2 kvarh)
Accuracy: ± 0.2% +10 dgt
Digital output and input
Output: on exceeding / falling below a digital output is triggered;
Input: start of the measurement by trigger pulse of the input;
Power factor
cos phi from -1 to +1 and angle display!
Maximum current (AC / DC): 32 A, (short-term 40 A)
Maximum voltage (AC): 750V
Maximum voltage (DC): 1000V
Data logger
4-channel operation allows you to store 2000 readings per channel. The values can be called up graphically and read out via the interface.
Measurement display
X-Y graph available and scalable by 2 finger gesture; ideal for long-term measurements;
